top of page

OPTIC PATTERNS

This list is only for referencing what footprints various optics use. Refer to the specific product description for the service you are purchasing to ensure you place the correct order for the optic you will be using.  

​

  • Trijicon RMR​

    • ​Trijicon: RMR, SRO​​

    • Holosun: 407c, 507c, 508t​, 507 Comp

    • Sig Romeo Zero R

    • Swampfox: Liberty and Justice

    • Riton PRD Series

  • Shield RMSc/RMS

    • Shield: RMS, RMSc, RMSx, RMSw​

    • Holosun: 507k, 407k, EPS, EPS Carry

    • Sig: Romeo Zero, Romeo Zero ELITE

    • Swampfox Sentinel

    • Riton MPRD Series

    • Primary Arms Classic 21mm

    • Salvo Optics SRC

    • Vortex Defender CCW

  • Docter Pattern

    • Vortex Venom​

    • Burris Fastfire 3

  • Leupold Deltapoint Pro

    • Leupold Deltapoint Pro​

    • Sig Romeo Zero Pro, Romeo 1 Pro

​

UNIQUE FOOTPRINTS NOT SHARED WITH OTHER OPTICS

​

  • Aimpoint ACRO P1 & P2​

  • Vortex Viper

  • Steiner MPS

  • Holosun 509T

  • Trijicon RMRcc

  • Primary Arms 509T ACSS

​

WE DO NOT MACHINE FOR CRIMSON TRACE, ADE, OR COUNTERFEIT OPTICS.

Stainless 6-32 Flat Mounting Screws

Stainless 6-32 Flat Mounting Screws

SKU: OMS-050-632
Replacement  6-32 stainless optic mounting screws (Qty. of 2 screws)
 
Available in some pre-cut lengths to drop right in or un-cut so you can trim them yourself to suit your optic/slide combination. Please note that pre-cut lengths are sized to match our optic cuts. We cannot ensure fitment with your slide/optic combination if machined elsewhere (in which case we reccomend purchasing the full length screws and trimming them to fit).
 
If ordered standalone then screws will be mailed via USPS.
 
If you do not make a note of what slide and optic you have you will be sent full length screws (0.5").
 
Things to know:
  • Screws are made from 18-8 stainless steel in the USA
  • Screws utilize a IP-10 Torx Plus drive (can also be used with a T10 driver). We HIGHLY recommend a quality bit/driver from a manufacturer such as Wiha
  • Screw head diameter is 0.262"
  • Un-cut length is 0.500" (top of screw to bottom of screw/overall length)
  • Bronze heat coloring
  • Sold as a pair
  • Torque specification is 10-15in/lbs
 
 
If you are looking to purchse hardware more economically then you can purchse fasteners here in a minimum quantity of 25 for $6.75 (we reccomend buying 6-32 x 1/2" and cutting to length): Click HERE
 
    $5.99Price
    Out of Stock

    Add Cerakote To Your Order

    $60.00Price
    bottom of page