top of page

OPTIC PATTERNS

This list is only for referencing what footprints various optics use. Refer to the specific product description for the service you are purchasing to ensure you place the correct order for the optic you will be using.  

​

  • Trijicon RMR​

    • ​Trijicon: RMR, SRO​​

    • Holosun: 407c, 507c, 508t​, 507 Comp

    • Sig Romeo Zero R

    • Swampfox: Liberty and Justice

    • Riton PRD Series

  • Shield RMSc/RMS

    • Shield: RMS, RMSc, RMSx, RMSw​

    • Holosun: 507k, 407k, EPS, EPS Carry

    • Sig: Romeo Zero, Romeo Zero ELITE

    • Swampfox Sentinel

    • Riton MPRD Series

    • Primary Arms Classic 21mm

    • Salvo Optics SRC

    • Vortex Defender CCW

  • Docter Pattern

    • Vortex Venom​

    • Burris Fastfire 3

  • Leupold Deltapoint Pro

    • Leupold Deltapoint Pro​

    • Sig Romeo Zero Pro, Romeo 1 Pro

​

UNIQUE FOOTPRINTS NOT SHARED WITH OTHER OPTICS

​

  • Aimpoint ACRO P1 & P2​

  • Vortex Viper

  • Steiner MPS

  • Holosun 509T

  • Trijicon RMRcc

  • Primary Arms 509T ACSS

​

WE DO NOT MACHINE FOR CRIMSON TRACE, ADE, OR COUNTERFEIT OPTICS.

MKII Aimpoint ACRO Optic Cut for Glock Slides

MKII Aimpoint ACRO Optic Cut for Glock Slides

Taking our ACRO cut for Glock slides to the extreme! This is the lowest cut we have for the Aimpoint ACRO on a Glock slide which allows the factory sights to provide a co-witness. This requires no modification to the optic and will keep your optic's warranty in tact. We have also made some updates to the optic pocket design to address some of the manufacturing variances observed on current production ACRO P-2's and C-2's. 
 
This machining service applies to all Glock models EXCEPT the G17L, slimline series of pistols, and rimfire models. There are only two configurations we offer for the ACRO on a Glock slide: elimination of the rear iron sight, or a new forward dovetail machined in front of the optic. This is due to the length of the optic. Please read all points below:
 
  • Two available mounting options:
    • Elimination of the rear iron sight (dovetail eliminator)
    • Rear iron sight mounted in front of the optic (irons forward)
  • Price does not include refinishing. Carbon steel slides will have a cold blue and oil coat applied to the machined pocket. Stainless steel slides will recieve an oil coat to the machined pocket.
  • Cerakote can be added to your order HERE
  • It is REQUIRED that the optic be supplied with the slide for machining and installation. We measure and fit EACH optic to each slide we install them on. We do this to ensure the most secure installation possible. 
  • Current leadtimes are located at the top of the webpage.
  • THIS IS FOR THE MACHINE WORK FOR THE OPTIC INSTALLATION ONLY!!! The optic is not included!
  • You are responsible for shipping cost / shipping your slide in to us. The shipping charge added at checkout covers the cost of return shipping back to you via USPS Flat Rate. If you would like to add insurance to your package (HIGHLY RECOMMENDED) you can do so HERE. 
 
Recommended Iron Sights
For our MK2 ACRO cut in a forward dovetail configuration we suggest the following when choosing iron sights for your setup:
  • The factory 6.1mm sights will provide a very low but useable co-witness.
  • If you are planning on using aftermarket sights we suggest keeping the blade height or the height above the slide at .225" or lower for the rear sight.
  • The rear sight should be a MOS profile with minimal overhang behind the sight dovetail to prevent running into the optic.
 
 
AFTERMARKET PRODUCT & SERVICE NOTICE
 
DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
 
Nameless Armament LLC is an independent aftermarket manufacturer and machining service provider. The products and services described on this page are not authorized, endorsed, sponsored, or warranted by GLOCK. Nameless Armament LLC is not affiliated with, sponsored by, endorsed by, or authorized by GLOCK. All machining, modification, installation, and fitting services described on this page are performed solely by Nameless Armament LLC on customer-supplied components.
 
THIS PRODUCT HAS BEEN MODIFIED BY NAMELESS ARMAMENT LLC.
    From $104.99Sale Price
    Quantity
    No Reviews YetShare your thoughts. Be the first to leave a review.

    IMPORTANT SHIPPING UPDATE

    Please be aware that as of 9/10/2025 you must add shipping insurance to your order manually. This allows you to choose the amount you would like to insure your slide and optic for. Insurance options can be found HERE.

    ​

    If you do not add shipping insurance to your order, your package will be shipped without insurance & Nameless Armament LLC will not be held liable for lost & or damaged packages once they have left our facility.

    bottom of page