top of page

OPTIC PATTERNS

This list is only for referencing what footprints various optics use. Refer to the specific product description for the service you are purchasing to ensure you place the correct order for the optic you will be using.  

​

  • Trijicon RMR​

    • ​Trijicon: RMR, SRO​​

    • Holosun: 407c, 507c, 508t​, 507 Comp

    • Sig Romeo Zero R

    • Swampfox: Liberty and Justice

    • Riton PRD Series

  • Shield RMSc/RMS

    • Shield: RMS, RMSc, RMSx, RMSw​

    • Holosun: 507k, 407k, EPS, EPS Carry

    • Sig: Romeo Zero, Romeo Zero ELITE

    • Swampfox Sentinel

    • Riton MPRD Series

    • Primary Arms Classic 21mm

    • Salvo Optics SRC

    • Vortex Defender CCW

  • Docter Pattern

    • Vortex Venom​

    • Burris Fastfire 3

  • Leupold Deltapoint Pro

    • Leupold Deltapoint Pro​

    • Sig Romeo Zero Pro, Romeo 1 Pro

​

UNIQUE FOOTPRINTS NOT SHARED WITH OTHER OPTICS

​

  • Aimpoint ACRO P1 & P2​

  • Vortex Viper

  • Steiner MPS

  • Holosun 509T

  • Trijicon RMRcc

  • Primary Arms 509T ACSS

​

WE DO NOT MACHINE FOR CRIMSON TRACE, ADE, OR COUNTERFEIT OPTICS.

CZ Shadow 2 507K Optic Cut

CZ Shadow 2 507K Optic Cut

This is for the machining and installation of the Holosun 507K / 407K (as well as other RMSc pattern optics) on a CZ Shadow 2 slide (excludes the Tactical Sport / TS2 models). This optic cut is also available with a Glock pattern rear dovetail behind the iron sight allowing for a co-witness through the optic. Please make sure you ship us your slide WITH the extractor in place as we will need to shorten the pin that retains it. Please read all points below:
 
Several options for installation location:
  1. Two mounting options are available: 
    • Elimination of the rear iron sight
    • A new Glock dovetail cut behind the optic 
  • Price does not include refinishing. Carbon steel slides will have a cold blue and corrosion inhibitor applied to the machined pocket.
  • Cerakote can be added to your order HERE
  • It is REQUIRED that the optic be supplied with the slide for machining and installation. We measure and fit EACH optic to each slide we install them on. We do this to ensure the most secure installation possible.
  • You are responsible for shipping cost. The Shipping added at checkout covers the cost of shipping back to you via USPS. Shipping includes $800 in insurance coverage.
  • Current leadtimes are located at the top of the webpage.
  • THIS IS FOR THE MACHINE WORK FOR THE OPTIC INSTALLATION ONLY!!! The optic is not included!

  • Iron Sight Information

    • Reccomended Setup: If less window obstruction is desired you can use an Ameriglo Glock .394" height or Dawson Glock MOS .325"  rear sight with a Dawson SP-01 .195" H x .125" W front sight (height above slide) for a lower co-witness.
    • An Ameriglo Glock .451"  (like the GL-428) or Dawson Glock MOS .375" height rear sight is suggested to reference properly with the factory 7.5mm front sight (measurement is from base of dovetail to top of sight).
$89.99Price
No Reviews YetShare your thoughts. Be the first to leave a review.

Add Cerakote To Your Order

$60.00Price
bottom of page