top of page

OPTIC PATTERNS

This list is only for referencing what footprints various optics use. Refer to the specific product description for the service you are purchasing to ensure you place the correct order for the optic you will be using.  

  • Trijicon RMR

    • Trijicon: RMR, SRO​​

    • Holosun: 407c, 507c, 508t​, 507 Comp

    • Sig Romeo Zero R

    • Swampfox: Liberty and Justice

    • Riton PRD Series

  • Shield RMSc/RMS

    • Shield: RMS, RMSc, RMSx, RMSw

    • Holosun: 507k, 407k, EPS, EPS Carry

    • Sig: Romeo Zero, Romeo Zero ELITE

    • Swampfox Sentinel

    • Riton MPRD Series

    • Primary Arms Classic 21mm

    • Salvo Optics SRC

    • Vortex Defender CCW

  • Docter Pattern

    • Vortex Venom​

    • Burris Fastfire 3

  • Leupold Deltapoint Pro

    • Leupold Deltapoint Pro​

    • Sig Romeo Zero Pro, Romeo 1 Pro

UNIQUE FOOTPRINTS NOT SHARED WITH OTHER OPTICS

  • Aimpoint ACRO P1 & P2

  • Vortex Viper

  • Steiner MPS

  • Holosun 509T

  • Trijicon RMRcc

  • Primary Arms 509T ACSS

WE DO NOT MACHINE FOR CRIMSON TRACE, ADE, OR COUNTERFEIT OPTICS.

SIG 1911 Leupold DPP Optic Cut

SIG 1911 Leupold DPP Optic Cut

SKU: SIG-1911-DPP

This is for the machining and installation of the Leupold Deltapoint Pro on a SIG 1911 slide. This includes all models with a standard Novak rear sight. THIS IS NOT FOR ADJUSTABLE REAR SIGHT MODELS OR OPTIC READY MODELS!!! 

 

-This optic cut will eliminate the factory rear iron sight. You can use a variety of rear sights that mount directly to the Leupold Deltapoint Pro.

-Your slide will need to have the internal firing pin safety modified in order to remain functional. We instead recommend converting your SIG 1911 to a Series 70 by removing the safety componants from the slide and frame. For the frame you will also need to either modify the safety actuator or replace it with a Series 70 conversion shim that replaces the frame mounted safety componants. Your grip and thumb safety will still remain intact by performing this conversion.

 

Please read all points below:

  • Please be aware that there can be dimensional variations between 1911/2011 variants. As such there may be mounting configuration limitations and individual/custom programming required for your slide. We usually won't be able to make this determination until we have your slide in the shop and can take in-person measurements.This means that it may take a little longer than our standard lead times. 
  • Please make sure to send us all of your internals for your slide (minus the barrel, barrel bushing and recoil spring) as there may need to be modifications made to them for proper function. 
  • If a Glock dovetail is feasible on your slide then the appropriate Glock rear sight height will need to be determined based upon measurements taken from your slide and current iron sight setup. Once we have your slide in the shop we can reccomend the appropriate rear sight height to co-witness with your optic and front sight.
  • Price does not include refinishing. Carbon steel slides will have a cold blue and oil coat applied to the machined pocket. Stainless steel slides will recieve an oil coat to the machined pocket.
  • Cerakote can be added to your order HERE
  • It is REQUIRED that the optic be supplied with the slide for machining and installation. We measure and fit EACH optic to each slide we install them on. We do this to ensure the most secure installation possible.
  • If you already have the required rear siron sight please send it with your optic and slide. We are happy to perform the fitting and installation for you free of charge!
  • You are responsible for shipping cost. The shipping added at checkout covers the cost of shipping back to you via USPS. Shipping includes $800 in insurance coverage.
  • THIS IS FOR THE MACHINE WORK FOR THE OPTIC INSTALLATION ONLY!!! The optic is not included!

 

 

    $99.99Price
    Out of Stock
    bottom of page