P365 SAS Optic Adapter Plate

PLEASE READ the Installation Manual found HERE
 
This adapter plate will allow the mounting of the optics that use the Shield RMSc mounting pattern (like the Sig Romeo Zero, Swamp Fox Sentinel, and Holosun 407K/507K) on the Sig P365 SAS. Simply remove the factory rear sight and install the adapter with the included M2.5 x 8mm (T8 Torx Drive) screws. You can then mount your optic to the plate with the included M3 mounting screws. It is required that you apply threadlock (we recommend Vibra-Tite VC-3)  to all hardware to prevent backing out. 
 
PLEASE NOTE - Due to variances in Sig's dimesions of the SAS sight pocket, final fitting may be required. If you do not feel comfortable performing installation yourself you may send in your slide and plate to have us perform the installation. You will just need to pay for the cost of shipping. 
 
Plates will ship in 3-4 business days.
 
Installation Instructions: Click HERE
 
Package Includes:
1- Sig P365 SAS Optic Adapter Plate finished in Hard Black Anodize
1- 2mm Allen Wrench
2- M3 - 10mm Button Head Screws for Shield RMSc
2- M3 - 10mm Countersink Head Screws for Sig Romeo Zero and Holosun 407/507K
2- M2.5 - 8mm Countersink T8 Torx Screws for securing adapter plate to slide
 
Items you will need for installation:
T8 Torx driver or bit (to remove factory sight and install plate)
Thread locker - VIBRA-TITE VC3 IS HIGHLY RECOMMENDED!!! Link to purchase HERE.
 
Installation Instructions can be found HERE
 
Links to replacement hardware
	
M2.5x.45 8mm  plate mounting screws LINK
	
M3x.5 10mm button optic mounting screws LINK
	
M3x.5 10mm countersink optic mounting screws LINK
 
Compatible Optics:
Shield Sights
	
RMSc
	
SMSc
	
RMS (will have an overhang)
	
RMSw (will have an overhang)
Sig Optics
	
Romeo Zero (will not work with metal shroud)
Holosun 
	
507K (includes new X2 models)
	
407K (includes new X2 models)
Swampfox Optics
	
Sentinel
Riton Optics
	
X3 Tactix MPRD
Zaffiri Precision / Salvo Optics
	
SRC